Chapter 6 Remote Configuration
Chapter 6 Remote Configuration
Functions of remote configurations include: System Configuration, Video Configuration, PTZ
Configuration, Alarm Configuration, Network Configuration and Advanced Configuration.
You should firstly select the menu on the left, and then setup the relative parameters. When
one user configures parameters of a certain device, other users can not setup this device.
6.1 System Configuration
The ―System configuration‖ includes three submenus: Basic Information, Date & Time and
SD card.
6.1.1 Basic Information
In the Basic Information interface, you can setup the device name and check the relative
information of the server.
Setting steps:
1.
Clicking the "Config" icon will appear the menu list.
2.
Clicking the ―Basic Information "will pop up a window as shown below:
Parameter
Meaning
Software version
The software of the device
Software build date
The software build date of the device
Kernel version
The kernel version of the device
Hardware version
The hardware version of the device
Mac Address
MAC address of device
Maximum number of user
Support max 6 users to access
Device name
Name of the device.
6.1.2 Date & Time Configuration
Setting steps:
1.
Enter into "System Configuration"
―Date & Time‖.
IP-CAMERA User Manual -
22