Chapter 5 Menu Setup
After you exit the main menu, press and hold
button to let the speed dome move to the
bottom so that the dome will auto flip.
5.1.2 Temperature Display
After enabling temperature and exiting the main menu setup, the temperature will display on
the remote preview image.
5.1.3 Zoom Display
If you select ―ON‖, the zoom information will be displayed on the remote preview image.
5.1.4 Language
This device supports English and Chinese Menu.
5.1.5 Home Position Setup
Enter Main Menu
System Setup
Home Position Menu as shown below:
The setting steps:
Enable the home position function and select the preset which should be set in advance. Then
select delay time (range from 007s to 180s) and exit the menu.
When the stand-by time of the dome camera exceeds the delay time, the camera will
automatically execute the command to monitor the selected preset.
5.1.6 View PTZ Version
Enter Main Menu
System Setup menu to check the PTZ version.
5.2 Camera Setup
After you enter camera setup menu, you will see the following screen.
Camera setup includes the settings of camera control, image setup, focus near limit, zoom
speed, DZoom and PAL/NTSC.
IP-CAMERA User Manual -
14