Chapter 2 Installation
①
Make the arrow of ―START‖ point to the bending part of the spring leaf as shown in
Fig 6.
②
Hook the steel wire on the frame as shown in Fig 7.
Steel Wire
(Fig 6)
(Fig 7)
③
Ressemble the base tray with the body. Move the camera upwards and make the guide
pins match with the guide holes. Turn the camera clockwise to fasten as shwon in Fig 8.
Fasten three screws as shown in Fig 9.
Three Screws
OPEN
LOCK
(Fig 8)
(Fig 9)
Step 4
：
Remove the protector.
①
Loosen four screws under the bottom cover as shown in Fig 10.
②
Remove the protective material and lens cap, reassemble the transparent cover with the
body and fasten the screws as shown in Fig 11.
Four Screws
（
Fig 10
）
（
Fig 11
）
2.2
Connection
IP-CAMERA User Manual -
3