UNITOUR Power System
User Manual
Page 46
3.22
Reset to Defaults
Tap
LOG IN
,
ADVANCED
,
SYSTEM SETTINGS, RESET TO DEFAULTS
.
The UCM.ini file is the show settings and all the configuration.
The Local.ini file is information that is stored local to the device such as slot information etc.
The Network.ini file is the network settings.
Tap the files to reset then tap
OK.
3.22.1
Set PIN Codes
UNITOUR there are four access levels.
•
USER. This level
includes the “Quick” menu, see section 3.3 and the menu buttons at
the bottom of the Home menu, see section 3.4.
•
ADVANCED, see section 3.11.
•
SERVICE. This level is always locked and requires a PIN. Contact LSC for access.
•
HOUSTON. This allows remote configuration and monitoring
using LSC’s HOUSTON
X software. See section 5
UNITOUR ships with the
“USER”, “ADVANCED” and “HOUSTON” levels unlocked. You can
protect these levels with a PIN code.
Tap
LOG IN
,
ADVANCED
,
SYSTEM SETTINGS, SET PINCODES
.
Tap a level that you want to lock then use the keypad that appears to enter a 4 to 8 digit PIN
then tap
SAVE
. Repeat the PIN then tap
SAVE
.
When logging into a locked level, enter the PIN then tap
UNLOCK
. The level remains unlocked
until you lock it again. To re-lock the level tap
LOG IN
,
LOCK
.