UNITOUR Power System
User Manual
Page 39
View Log
Log files are automatically archived at midnight every day. To view archived logs, tap
ARCHIVES
.
3.17
Configure Art-Net
ArtNet (designed by and copyright, Artistic Licence Holdings Ltd) is a streaming protocol to
transport multiple DMX universes over a single Ethernet cable/network. To enable the ArtNet
input, from the f
rom the “Home Menu” tap
LOG IN
,
ADVANCED
,
CONFIGURE ART-NET
.
Art-Net Setup
UNITOUR supports Art-Net v4. There are 128 Nets (0-127) each with 256 Universes divided
into 16 Subnets (0-15), each containing 16 Universes (0-15).
Tap the up
or down
arrows to set the
“Net”, “Subnet” and “Universe values, then tap
SAVE
.
Note: If you are using Art-Net I or Art-Net II, leave the Net setting at 0 (zero) and only use the
Subnet and Universe settings.
Any Art-Net universes currently being transmitted on the network will appear in the display in
the bottom right corner of the screen. This can be useful when selecting a valid universe
Note. When using Art-Net, UNITOUR must have a valid IP address and NetMask entered in
the “Network Settings” menu in order for Art-Net to work correctly. It is essential that the IP
address is set to be compatible with the address on the device sending the Art-Net packets.
In UNITOUR
’s network setup menu, when using Art-Net, the option to set the IP address is
offered based on the ArtNet recommendations when using a 2.0.0.0. address range. See
section 3.21.1
