UNITOUR Power System
User Manual
Page 51
7
Phasing
In 3 phase power systems it is desirable that the output loads are distributed as evenly as is
practical between the 3 input phases.
The outputs of each UNITOUR output module are fed from the following input phases:
Output Channel Input Phase
1
1
2
2
3
3
4
1
5
2
6
3
7
1
8
2
9
3
10
1
11
2
12
3
8
Specifications
Control
Control module (UHM) located at top of rack for easy access
and programming
18cm active TFT colour display with inbuilt touchscreen
recessed into chassis for mechanical protection
Dual Ethercon connectors with internal Ethernet switch, to
allow daisy-chaining of multiple racks for TCP/IP, UDP,
sACN, Art-Net and other network protocols
Single front panel mounted DMX in and thru connector of 5-
pin XLR style connector
Single front panel mounted USB Type A connector for
configuration import and export and software upgrades, plus
dual front panel mounted power-only USB Type A ports for
device charging
Large RGB status LED to indicate fault/OK condition of rack
from a distance
Real-time display of RMS voltage and currents across all 3
neutral within the rack
Internal configuration and control of all USMT (switch) and
UDMT (switch/dim) modules
R
emote monitoring and configuration via LSC’s HOUSTON X
software suite
