1
Install it to the copied inverter.
3
Remove the keypad.
2
PAR
▶
Para. read
02 --- Yes ---
PAR
▶
Para. write
03 --- Yes ---
4
3) PAR_04 (Parameter Lock)
Set it to “12” to disable “paramter change”.
Code
LCD display
Description
Setting range
Unit
Factory
setting
PAR_04
Para. Lock
Parameter lock
0 ~ 255
0
4) PAR_05 (Password)
When user put any four-digit number except “0” and cycle the power, only Display groupd will appear. Press [Mode]
key and PAR_05 ”Password” will be directed. If the right password is entered, all other groups can be accessed and
adjustable. To clear the password, set it to “0”. When you forget the password, enter “5052”. It is the master password
and it resets the password to “0”.
Code
LCD display
Description
Setting range
Unit
Factory
setting
PAR_05
Password
Password
0 ~ 9999
0