Chapter 4 Loader and Basic Operation
4-1
4.1 Keypad operation
LCD Keypad can display up to 32 alphanumeric characters and monitor or set parameter values to operate the
inverter and the motor properly. As follows are keypad view and explanation on each key/LED on the keypad.
Item
Display
Function
Description
MODE
Mode
Enables to move to the other groups
(Initial Screen
→
IO
→
PAR
→
FUN…)
and go to the first code in the same group.
PROG
Program
Enables to modify setting values.
ENT
Enter
Enables to move to the other groups
(Initial Screen
←
IO
←
PAR
←
FUN…) and
save the changed setting values.
▲
(Up)
Up
Moves to the next code or increments setting values.
▼
(Down)
Down
Moves to the next code or decrements setting values.
SHIFT/ESC
Shift/ESC
Acts as Shift key in a setting mode and as ESC key in other mode.
REV
Reverse RUN
Reverse RUN command is enabled.
STOP/RESET
Stop/Reset
Stop key during inverter operation.
Resets fault when inverter returns to normal after fault has
occurred.
KEY
FWD
Forward RUN
Forward RUN command is enabled.
(REV)
Reverse RUN
Lights when motor is in reverse revolution.
Blinks on acceleration/deceleration, lit in a constant speed
(STOP/RESET) Stop/Reset
Lights when the motor stops.
Blinks when fault has occurred.
LED
(FWD)
Forward RUN
Lights when motor is in forward revolution.
Blinks on acceleration/deceleration, lit in a constant speed
0.0rpm SPD
Tq 0.0% 0.0A