LS ELECTRIC H100 0008-2(PLUS), Руководство пользователя

Страница: 16 / 239

Quick Start Reference
Q
xvi
3. Setpoint, Feedback Scaling
▶
PID-10 PID Setpoint 1 Source
Setting
0
Keypad
6
FieldBus
1 V1 7 -
2 - 8 Pulse
3
V2
9 V3
4
I2
10 I3
5
Int485
▶
PID-11 PID Setpoint 1 Set
A setpoint value can be entered if the PID setpoint source (PID-10) is se
t to ‘0 (Keypad)’. And also
PID setpoint can be set in Monitor screen when PID-10 is set to
‘0 (Keypad)’.
▶
PID-20 PID Fdb Source
Setting
0
V1 5 FieldBus
1 - 6 -
2 V2 7 Pulse
3 I2 8 V3
4 Int485 9 I3
4. Sleep Mode
▶
PID-59 Sleep Level type
The following sleep level types can be selected:
Setting
1
Frequency (Factory Default)
2 Output Current
3
PID Feedback Value
4 RPM
5 Flow Rate
▶
PID-62 PID Sleep 0 DT
▶
PID-63 PID Sleep 0 Lev
If the operating frequency stays below the frequencies set at PID-63 for the set times at
PID-62, the VFD enters standby mode.
▶
PID-56 Pump Minimum Speed
Pump minimum speed sets the low limit on the command frequency.Minimum Limit
operates based on the greatest value of following:
-
AP2 40 Thrust Frequency, PID 56 Pump Minimum Speed, ADV 25 Freq Limit Lo