52
Following a Route
To recall a route, press the WPT key, then move
the black box to the “Next Page” label at the
bottom of the screen and press the right arrow
key. Now move the black box to the “Run Route”
label and press the right arrow key. The screen
shown below appears.
The black box is on the “Route # 01” label. If
this isn’t the route you want to use, press the
right or left arrow keys to switch to another one.
Before starting the route, you’ll need to decide
if you want to start at the beginning and travel
forward or start at the last waypoint in the route
and travel backwards (reverse) to the first
waypoint. The default is forward.
You can also start at any waypoint in the route
by moving the black box to the “Start at NO 01” label, then pressing the
left or right arrow keys to change the starting waypoint number. As you
change the number, the “START” label moves down the list of waypoints
in the lower half of the screen.
When you have everything on this screen set as desired, press the ENT
key to start the GlobalMap Sport™ navigating to the first waypoint on the
route.
As you travel to the first waypoint, the unit shows navigation data to the
waypoint. When the arrival alarm sounds, the GlobalMap Sport™ auto-
matically switches to the next waypoint on the list, showing navigation
data to that waypoint, and so on until the last waypoint on the route list
has been reached.
Waypoint Detail
To view the position, bearing, distance, and
other information about a waypoint saved in a
route, first select the route, then move the black
box to the desired waypoint. Now press the right
arrow key. The screen shown at right appears.
