LOCKLY GUARD INGRESS Скачать руководство пользователя страница 40

Страница: 40 / 44

Unauthorized changes and modifications may void your product

warranty. If you have questions or any problems while using your

Lockly Guard Ingress, contact our customer service department at

[email protected] or visit Locklypro.com/support for technical

assistance.

SECTION 9.1

FCC Warning

：

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference

that may cause undesired operation.

NOTE 1:

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

Please read all instructions carefully. Remind all Lockly Guard users of the safety

precautions.

Do not attempt to disassemble the smart lock by yourself. It can cause

product damage, void warranty, and cause injuries.

Do not use any inappropriate tools that can cause damages or malfunction

to your lock.

Always make sure your door is securely closed and locked when you

leave your house to prevent unwanted entry.

Please keep your Access Codes safe. Restrict access to the back panel of

your smart lock and check your settings regularly to ensure Access

Codes have not been changed without your knowledge.

Always dispose of used batteries according to your local laws. DO NOT

BURN.

9.1 Safety Precautions

Read the following instructions for your own safety

Содержание INGRESS













































Результаты поиска

Содержание INGRESS

Отзывы:

Похожие инструкции для INGRESS

Бренды по названию

Популярные бренды

LOCKLY GUARD INGRESS, Руководство пользователя

Результаты поиска

Содержание INGRESS

Отзывы:

Похожие инструкции для INGRESS

Бренды по названию

Популярные бренды