LOCKLY GUARD INGRESS Скачать руководство пользователя страница 38

Страница: 38 / 44

SECTION 6.4

Lockly Guard Ingress can be programmed to manage a single unit or multiple

units with sub-admin management access.

Example of Single Unit (Office Employee access management)

Enter the employee number > Confirm > enter the password (PIN Genie Keypad)

> Confirm, that is, enter the employee number before entering the password.

Note: up to 100 groups of passwords can be added. If there are more than100

groups, you can only use the employee password mode to increase

the number of password groups.

Example of Multiple Units (Residential Apartments)

Enter the apartment number on the PIN Genie keypad, then press the doorbell

on Ingress Vision to open video camera (PGI303 only). The apartment sub-admin

can unlock and allow guest to enter. If using Ingress (PGI302), enter the

apartment number and press the doorbell to notify the corresponding

homeowner /sub-admin to unlock for their guests.

Multi-Tiered verification

Can also be setup for better security. Multitiered verification is a premium feature

available for Lockly\OS users. It allows unlocking with the use of RFID card +

Fingerprint, RFID card + password, finge password, RFID card + fingerprint

+ password for unlocking verification. After entering an item for verification, the

green light flashes 0.8s OFF, 0.8s ON and 30s. The next verification needs to be

entered within 30s.

Lockly\OS paying subscribers can support more access solutions based on

different scenarios in addition to the features presented on this user manual.

Based on scenarios in addition to the above basic functions.

If you have a different scenario you wish to discuss, call our access solution

experts Hotline: +1 (855) 562-5599 or visit: Locklypro.com/support.

6.4 Multi Units and Tiered Verifications

Содержание INGRESS













































Результаты поиска

Содержание INGRESS

Отзывы:

Похожие инструкции для INGRESS

Бренды по названию

Популярные бренды

LOCKLY GUARD INGRESS, Руководство пользователя

Результаты поиска

Содержание INGRESS

Отзывы:

Похожие инструкции для INGRESS

Бренды по названию

Популярные бренды