LOCKLY GUARD INGRESS, Руководство пользователя

Страница: 25 / 44

SECTION 3.13 - 3.14 23
3.13 Pairing via Bluetooth
In order to setup the Lockly Guard Ingress to another smart phone, you will need
to enter the programming mode.
While in Programming Mode, select “3BL” to pair a new smart phone. If you are
not in Programming Mode, please see Section 3.1 to enter Programming Mode.
After pressing “3BL” , the BL icon will flash and you will
here short beeps. You need to wait and allow the
pairing of new devices.
You will hear long beep and the green light will be on,
if the pairing is successful. You will here 3 short beeps
and the red light will be on if pairing is unsuccessful.
You will need to re-enter the programming mode, then
Bluetooth pairing mode "3BL" to re-pair the device.
3.14 Resetting
IMPORTANT: Before performing a reset, please be reminded that all information
on the lock will be deleted included stored fingerprints, access codes, eKeys,
RFIDs and access records. You will be required to enter you Activation Code
once you are ready to pair your Lockly Guard Ingress to smartphone or to setup
new access codes.
While in Programming Mode, select “4RE” to reset your
lock. If you are not in Programming Mode, please see
Section 3.1 to enter Programming Mode.
Select Y to confirm you want to reset. The green light
indicator flashes and the lock will start to reset.
The lock will automatically exit the reset mode if there is
no action or confirmation received within 30s. Alternatively,
you can quickly press the program button to exit the
reset mode.