Installation Instructions
RSX LED
©2016 Acuity Brands Lighting, Inc.
All Rights Reserved.
Lithonia Lighting Outdoor
One Lithonia Way, Conyers, GA 30012
Phone: 800-279-8041 Fax: 770-918-1209
www.lithonia.com
Part Number: IN-379 Rev F
Revision Date: 11/19/18
RSX WBA INSTALLATION
Tools Required: Socket wrenches: 9/16"; Allen wrench: 9/64"
1. CAUTION: APPLY A CONTINUOUS BEAD OF WEATHER – PROOF CAULKING BETWEEN MOUNTING
BASE PLATE AND WALL TO ENSURE WEATHER – TIGHT INTEGRITY OF ELECTRICAL COMPONENTS (See
Figure 14a & 14b ).
2. Place the base plate in orientation shown in Figure 14a and secure to wall with secure base plate to wall with (4)
1/4” diameter fasteners (by others) using the (4) holes located on the outer corners of the base plate. Check the base
plate to confirm that it is level and plumb in all directions (See Figure 14b).
3. Prepare the cover plate by ensuring the factory installed gasket is in place on the backside of the cover plate (See
Figure 15).
4. Open up the light fixture carton and locate the threaded steel bar, and the (2) 3/8” diameter lock bolts that are
2-1/2” long.
5. Note for the next steps the curved portion of the cover plate should point upwards when mounted to the wall (See
Figure 15).
Figure 14a
Figure 14b
Figure 15
Base Plate
(4) ¼” Fasteners
(by others)
Curved portion
of the cover plate
Factory installed
gasket