Installation Instructions
RSX LED
DELIVERY: Upon receipt of fixture and accessories (packed sepa-
rately), thoroughly inspect for any freight damage. All damage should
be reported to the delivery carrier. Compare the catalog descrip-
tion listed on the packing slip with the fixture label on the inside of
the housing to be sure you have received the correct merchandise.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
RSX SPA/RPA INSTALLATION INSTRUCTION
Tools Required: Socket wrenches: 3/8"; Allen wrench: 5/32"
Minimum square pole: 3.5" face
Minimum round pole: 3.2" diameter
5 year limited warranty
©2016 Acuity Brands Lighting, Inc.
All Rights Reserved.
Part Number: IN-379 Rev F
Revision Date: 11/19/18
Lithonia Lighting Outdoor
One Lithonia Way, Conyers, GA 30012
Phone: 800-279-8041 Fax: 770-918-1209
www.lithonia.com
Figure 2a Figure 2b Figure 2c
Top Hole
1. Loosen two captive screws on cover of the SPA to access the
pole mounting area (See Figure 1).
2. Two mounting bars are included in the installation kit:
a. The shorter bar is used for #8 Lithonia drilling and has 3
holes. The top and bottom hole are threaded.
b. The longer bar has 1 top hole and a slot with a
sliding threaded hole to be used on poles with existing drill
patterns.
3. Hold the first bar (See Figure 2a) with 3 holes
up to the mounting holes on the pole and if they
align use that bar. Use the bar (See Figure 2b) with
the sliding thread for all other patterns.
Insert one 3/8 mounting bolt through the top
hole of the pole. Thread this bolt into the flat bar
(See Figure 2a) stock top hole. If the pole has a
different hole pattern, use the bar (See Figure
2b) with the slide on it. For a round pole, the
round pole adapter (RPA) is required which is
placed between the pole and the fixture as shown
with curved side contacting pole and flat side facing
away from pole (See Figure 2c).
Figure 1