©2016 Acuity Brands Lighting, Inc.
All Rights Reserved.
Lithonia Lighting Outdoor
One Lithonia Way, Conyers, GA 30012
Phone: 800-279-8041 Fax: 770-918-1209
www.lithonia.com
Part Number: IN-379 Rev F
Revision Date: 11/19/18
Installation Instructions
RSX LED
5. Insert the ground wire comes from tenon to the 3 way Wago connector with the green wires from SPD and lumi-
naire ground connection and lock it. Repeat this step for black (hot) and white (neutral) wires. Select Wago connec-
tors with matching colored wires coming from SPD (See Figure 9a, 9b, 9c).
Figure 9b
Figure 9a
Figure 9c
6. Use cable tie and tie all newly attached wires shown in
Figure 10.
7. Make sure that wires are not pinched, the door gas-
ket did not move from original position, and sits in its
groove on the door properly. Reinstall the mounting
door (Figure 11) that was removed, tighten the six cap-
tive screws with the 5/32 Allen wrench to 25-30 in-lbs
(overtighten can cause thread stripping and void all
warranties).
Figure 10
Figure 11