southpaw enterprises, inc.
®
Instruction Sheet - Bubble Tube with
Ping Pong Insert and Padded Platform #303104
Take time to familiarize yourself with the use and maintenance of this equipment before using. Please file
this Instruction Sheet in an accessible location. The Instruction Sheet must be read and familiar to anyone
who is using Southpaw Enterprises Equipment.
Store these instructions along with the enclosed maintenance checklist in
a safe place. You may also access them on our website.
MATERIALS LIST
-Wooden Platform
-Pinch Valve
-Instruction Sheet
-White vinyl-covered Pad
-LED Remote Control
-Security Bracket Instruction Sheet
-6” Acrylic Tube
-Funnel
-Maintenance Checklist
-2” Acrylic Tube
-Allen Wrench
-6 Colored Ping Pong Balls
-Bubble Column Drain Hose
-Allen Wrench
-Algae Preventer Solution
-4 Screws
-Security Bracket
A. INSTRUCTIONS FOR ASSEMBLY
Remove small lid on top of the wooden Platform. Place Bubble Column on top of the wooden slats
positioning the holes in the acrylic base over the pre-drilled holes on the slats and the air hose
pointed toward the front of the Platform (i.e. opposite the side where the electrical plugs are located).
Tighten screws with Allen Wrench. Connect hose fittings from the base of the Bubble Column to the
fitting on the underside of platform. Push together until you hear a “snap.”
USE DISTILLED WATER ONLY TO FILL BUBBLE COLUMN
Column takes just under 5 gallons of distilled water. Pour entire contents of Algae Preventer Solu-
tion when you fill the column. DO NOT OVERFILL. When pouring water into the Column plug the
unit in so the air pump is running. This will let you know the maximum water level when the unit is
running. To add water, either remove the entire lid or just the small plug in the middle of the lid and
use the funnel to control spillage. Before putting the covers on the platform you can adjust the air-
flow to the tube that controls the speed of the ping balls by turning the white pinch valve on the air
hose leading to the tube.
B. LED SETTINGS
The Unit comes pre-set from the factory with the M3 setting. A Remote Control is provided if you
want to change the setting. Changes should be made by the Therapist ONLY.
-REMOTE OPERATION
-Explanation of Controls
IMPORTANT: Please check equipment immediately for any damage that may have resulted during shipping.
If any damage has occurred, please contact Southpaw Enterprises, Inc. immediately.
