Linksys NSS4000 Series Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 174

Linksys NSS4000 Series Скачать руководство пользователя страница 49

47

Chapter 4: Storage
Deleting an Array

Network Storage System (NSS) Administrator Guide

Chapter

4

Deleting an Array

You can remove an existing array and release the disks used in the array back into available storage.
Note that deleting an array also deletes any existing data on the array (including the volumes, shares,
and quotas). If you delete an array that contains the volume that is used as the location of your users’
Home Directories, note that you must assign a new volume as the Home Directory location.

To delete an existing array:

1. From the

Manager Menu

, click

Storage

RAID.

The

RAID

page appears.

2. Click

Delete

in the row of the RAID array that you want to delete.

A warning message appears.

3. To continue, click

OK

.

The deleted array disappears from the list of existing arrays. The disks used in the array are
released back into available storage and appear in the

New RAID Device

table.

«
...
47
48
49
50
51
...
»

Содержание NSS4000 Series















































































































































































Отзывы:

Нет отзывов