AERO.100 User Guide
©2016 TLS Corp. ALL RIGHTS RESERVED
Oct 2016
Page 71
5.4
5.4
5.4
5.4
AERO Scheduling
AERO Scheduling
AERO Scheduling
AERO Scheduling
Another new feature in latest update to AERO.100 is an internal automation system. Any
command in the GPI menu, and any Task, can be run according to a day-of-the-week, hour-of-
the-day, internal scheduling application. The scheduling is part of the NfRemote GUI and can
be found by navigating to:
System > Scheduling > Event x-y
See Figure 5-11.
Figure 5-11
Event Scheduler
Two events are shown on each of 13 screens named Event A-B to Event Y-Z.
1.
Each event can be scheduled to the hour/minute/second and the day of the week.
2.
An event can be scheduled to occur at the assigned time on multiple days.
3.
Assignment of the event is done in the same way as a GPI is assigned.
The stereo and 5.1 surround switching Tasks, created in section 8.3, are used in the next
example.
Figure 5-12 shows the change to stereo occurring every weekday at 11:29:59 PM. The
scheduler works in 24-hour time to avoid errors. The time is shown as 23:59:59. The scheduled
event is not enabled yet and can still be modified. All selections are available.
In the next example, shown in Figure 5-13, the AERO is switched to 5.1 surround mode every
weekday at 5:59:59 AM. In this figure the event is enabled and al selections are grayed out
because they cannot be modified while the event is enabled.
