Lindsay FIRLDNET GSM CELLULAR RTU, Руководство по установке

Страница: 62 / 85

P/N 1389990 Rev B (ECN 32099) 62 Spread Spectrum Installation Guide
Step 6:
Identify USB ports you will use to connect your base radios to the Bridge.
The Bridge supports FieldNET spread spectrum RTUs, Online Control radios and
“transparent mode” radios such as the Elpro.
The FieldNET Bridge has 6 USB Ports. Two USB ports are on the front and four
USB ports on the back.
By default four of the USB ports are configured for use with the FieldNET
spread spectrum Base RTUs. One USB port is configured for use with
Online Control radios and one USB port is configured for transparent mode
radios such as the Elpro.
If you require a different configuration of these ports contact the Lindsay Service
Department.
Front USB Ports
Left Right
USB1 USB2
USB1
FieldNET
USB2
FieldNET