Linde T 16, Руководство по эксплуатации

Страница: 42 / 53

3
6
0
8
0
4
2
5
1
1
-
0
5
0
4
Maintenance Maintenance every 2000 hours
Changing the hydraulic fluid
- Remove the pump motor unit.
- Remove the two semi-circular collars (2).
- Detach the reservoir (1).
- Drain the fluid.
- Clean the two strainers (3).
Refilling
- Refit the reservoir (1) to the pump motor unit, taking care
to seat the O-ring (4) properly.
- Refit the pump motor unit to the chassis.
- Reconnect the pipes.
- Unscrew the filler plug (6).
- Refill the reservoir (1) through the opening (5).
- Fill the reservoir to its maximum level.
- Replace the filler plug (6).
- Operate the lifting system several times in order to purge
the system.
- Lower the fork arms to their full extent.
- To check the fluid level.
- The fluid level (7) must be between the min. and max.
markings on the reservoir (mid-way mark).
- If necessary, remove the filler plug (6) and top up with
fluid.
- Replace the filler plug when finished.
- Close the front cover by swivelling.
ATTENTION
Use only hydraulic fluid which meets the rele-
vant specifications (see table of lubricants).
https://www.besttruckmanuals.com/