Linde T 16, Руководство по эксплуатации

Страница: 36 / 53

3
6
0
8
0
4
2
5
1
1
-
0
5
0
4
Cleaning the battery and battery compart-
ment
CAUTION
This is a delicate operation, and requires the
wearing of gloves, goggles and acid-resistant
clothing.
Observe the precautions stipulated in the preceding
chapters. Do not dispose of acid-polluted washing water
in drains.
For further information, refer to the instructions supplied
with the battery.
Battery in unsealed box
- Check for traces of sulphation in the box and on the
chassis.
- If sulphation is mild, it is sufficient to clean the upper
surface of the cells with a damp cloth.
- In the case of heavier sulphation, it is necessary to
remove the battery, pressure-wash it and clean the
chassis.
Checking the condition of battery cables,
terminals and connector
- Check that cable insulation is undamaged, and that the
connections show no sign of overheating.
- Check that the + and - battery terminal pillars are not
sulphated (indicated by the presence of a white salt-like
deposit).
- Check the condition of the connector contacts, and the
presence of the locating pin.
ATTENTION
Failure to observe the above procedures may
result in serious damage. Please contact your
local representative as quickly as possible to
remedy any such damage.
Maintenance Maintenance as required
Battery in sealed box
- Check that there is no electrolyte in the bottom of the box
by connecting the suction bulb supplied with the battery
to the plastic plunge tube.
- Pump out any electrolyte which may have overflowed
between the cells.
- Clean the upper surface of the cells with a damp cloth.
ATTENTION
In the event of heavy sulphation or substantial
electrolyte overflow, please contact your local
representative.
https://www.besttruckmanuals.com/