Linde T 16, Руководство по эксплуатации

Страница: 34 / 53

3
6
0
8
0
4
2
5
1
1
-
0
5
0
4
2
Maintenance Maintenance as required
Pull the flexible cover clear to access the
reduction gearbox and the motor
- Remove the front cover
- Remove the three flexible cover (2) support screws (1)
- Remove the bearing plate (3)
- Move the tiller to the right (for the reduction gearbox) or to
the left for the motor.
- Lift the cover by 2 to 3 cm and then pass it over the bracket
making use of the cutouts.
- Fold the lower part back on the inside support.
- To close, position the lower locking pins (2) in the holes
in the frame or in the power cable compartment.
- Replace the 2 screws (1) in the cover.
Opening the front cover
- Unscrew the 2 screws (1) holding the cover.
- Pull the cover towards the back.
- Lift the cover and place it on the ground.
https://www.besttruckmanuals.com/