Linde T 16, Руководство по эксплуатации

Страница: 24 / 53

3
6
0
8
0
4
2
5
1
1
-
0
5
0
4
2
3
1
Driving Use
Forward travel
- Gradually press the lower part of the accelerator control
(1) with the thumb (rotation of accelerator control in
direction 2).
- The speed of the truck is proportional to the pressure
exerted.
NB
When starting on a slope, press the accelerator control in
the required direction with the tiller in position 2 (truck
braked). Power is then applied to the motor at low voltage
and current.
Tilt the tiller into the driving position, in order to remove the
brake and start off.
Reverse travel
- Gently press the upper part of the accelerator control with
the thumb (rotation of accelerator control in direction 3).
- The pallet truck accelerates in reverse, in proportion to
the pressure exerted.
Reversing the direction of travel
- Release the accelerator control and operate it in the
opposite direction.
Reversal of the direction of travel can be initiated whil e the
truck is moving.
In this case the appliance will first be braked electrically
to a standstill and will then restart in the opposite direction.
Safety reverse button
In order to protect the driver from being trapped between
an obstacle and the appliance, the end of the tiller is fitted
with a safety reverse button (1).
As soon as the flap is pushed in, the machine immediately
stops by automatic inversion of the direction of movement.
To rearm the safety system, place the tiller in position 2 or
3 again, before reactivating the accelerator control.
https://www.besttruckmanuals.com/