Lika CANopen SFA-10000-CB Скачать руководство пользователя | Manualshive

Страница: 12 / 88

background image

the interface for feeder sub-systems.

CiA DSP 415

The CANopen application profile for asphalt pavers specifies
interfaces to different devices used in road construction
machinery.

CiA DSP 416

The CANopen application profile for building doors specifies
interfaces for locks, sensors, and other devices used in
electronically controlled building doors.

CiA DSP 417

The CANopen application profile for lift control specifies the
interfaces for car controller, door controller, call controller and
other controllers as well as for car units, door units, input
panels, and display units, etc.

CiA DSP 418

The CANopen device profile for battery modules specifies the
interface to communicate with battery chargers.

CiA DSP 419

The CANopen device profile for battery charger specifies the
interface to communicate with the battery module.

CiA DSP 420

The CANopen device profile family for extruder downstream
devices defines interfaces for puller, corrugator and saw
devices.

CiA DSP 421

The CANopen device profile for railways specifies interfaces to
sub-systems such as diesel engines, brake controllers, door
controllers, etc.

CiA DSP 422

The CANopen application profile for municipal vehicles defines
the communication of sub-systems used in garbage trucks.

CiA TR 308

This technical report specifies some timings for CANopen
performance testing tools.

Client / Server
communication

In a Client/Server communication the Client initiates the
communication with the Server. It is always a point-to-point
communication.

Client SDO

The Client SDO initiates the SDO communication by means of
reading or writing to the Object Dictionary of the Server
device.

COB ID

The COB ID is the object specifying the CAN message identifier
and additional parameters such as valid/invalid and remote
frame support.

Communication object
(COB)

A communication object is one or more CAN messages with a
specific functionality, e.g. PDO, SDO, Emergency, Time, or Error
Control.

Communication profile

A communication profile defines the content of
communication objects such as Emergency, Time, Sync,
Heartbeat, NMT, etc. in CANopen.

Configuration Manager

The Configuration Manager (CMT) provides mechanisms for
configuration of CANopen devices during boot-up.

Confirmed
communication

Confirmed communication services require a bi-directional
communication, meaning that the receiving node sends a
confirmation that the message has been received successfully.

«
...
10
11
12
13
14
...
»

Содержание CANopen SFA-10000-CB

























































































Отзывы:

Нет отзывов

Похожие инструкции для CANopen SFA-10000-CB

Бренд: XSY Страницы: 22

Бренд: Y-Solar Страницы: 5

Бренд: NAIM Страницы: 2

Бренд: Perlight Solar Страницы: 19

Бренд: Schwarzbeck Страницы: 6

IMP-C1000-SFP-bt-24 Series

Бренд: ANTAIRA Страницы: 2

Бренд: Humandata Страницы: 10

Бренд: ICP DAS USA Страницы: 43

H0FL-EthMux.SA1601

Бренд: Huahuan Electronics Страницы: 55

Slimline Plus 1250

Бренд: Wagan Страницы: 32

Бренд: HEIDENHAIN Страницы: 44

Бренд: Goobay Страницы: 8

Бренд: Green Gear Страницы: 222

Бренд: Rohde & Schwarz Страницы: 17

Бренд: C2G Страницы: 263

Бренд: Bush Страницы: 42

Бренд: INVT Страницы: 174

SC-TDC-1000 D Series

Бренд: Surface Concept Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды