Lika CANopen SFA-10000-CB Скачать руководство пользователя | Manualshive

Страница: 11 / 88

background image

loop controllers supports also multi-channel devices.

CiA DS 406

The CANopen device profile for encoders defines the
communication of rotating as well as linear sensors.

CiA DSP 302

The draft standard proposal for programmable CANopen
devices includes CANopen manager functions, dynamic SDO
connections, standardized boot-up procedure for NMT Slaves
as well as program download.

CiA DSP 304

The CANopen safety protocol specification is approved by
German authorities and is compliant to SIL class 3
applications.

CiA DSP 305

The Layer Setting Services (LSS) specify how to set node-ID
and transmission rate via the CANopen network.

CiA DSP 306

This draft standard proposal defines format and content of
Electronic Data Sheets (EDS) to be used in configuration tools.

CiA DSP 308

The CANopen framework for maritime applications defines
redundancy of networks including swapping mechanism for
SDOs and PDOs.

CiA DSP 309

Set of gateway specifications for CANopen to Ethernet-based
networks (e.g. Modbus TCP(IP)).

CiA DSP 402

The CANopen device profile for drives and motion controllers
defines the interface to frequency inverters, servo controllers
as well as stepper motors.

CiA DSP 405

The CANopen device and interface profile for IEC 61131-3
compatible controllers is based on the CiA DSP 302
specification using network variables to be mapped into PDOs,
and function blocks for SDO services, etc.

CiA DSP 407

The   CANopen   application   profile   for   passenger   information
systems   developed   in   cooperation   with   the   German   VDV
specifies interfaces for a range of devices including displays,
ticket   printers,   passenger   counting   units,   main   onboard
computer, etc.

CiA DSP 408

The CANopen device profile for hydraulic controllers and
proportional valves is compliant to the bus-independent
VDMA device profile.

CiA DSP 410

The CANopen device profile for inclinometer supports 16-bit
as well as 32-bit sensors.

CiA DSP 412

The CANopen device profiles for medical equipment specify
the interfaces for x-ray collimators, x-ray generators, stands
and tables.

CiA DSP 413

The CANopen interface profiles for in-vehicle truck gateways
specify gateways to ISO 11992, J1939, and other in-vehicle
networks. The CANopen network is mainly used for truck- or
trailer-based superstructures, e.g. as in garbage trucks, truck-
mounted cranes, and concrete mixers.

CiA DSP 414

The CANopen device profile for weaving machines specifies

«
...
9
10
11
12
13
...
»

Содержание CANopen SFA-10000-CB

























































































Отзывы:

Нет отзывов

Похожие инструкции для CANopen SFA-10000-CB

Бренд: 3onedata Страницы: 3

Бренд: NAIM Страницы: 2

Бренд: Lika Страницы: 2

Бренд: Pulsar Страницы: 4

VARIOMAT 2 11MM

Бренд: Calpeda Страницы: 64

Бренд: Intech Страницы: 4

PowerSourcePro REINVMA10

Бренд: ring Страницы: 122

Бренд: REFU Страницы: 140

Бренд: Most Страницы: 32

AEM-CAPXX-PF-EVK

Бренд: PowerFilm Страницы: 2

Бренд: Riello Страницы: 16

Бренд: Digitus Страницы: 5

Бренд: Cross Technologies Страницы: 24

Бренд: Delta Electronics Страницы: 181

Бренд: Alcor Страницы: 22

Бренд: ETQ Страницы: 32

Бренд: Woodpecker Страницы: 22

Бренд: Digitus Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды