Lightware MODEX-F15-OPTM-RX, Руководство пользователя

Страница: 26 / 98

4. Operation MODEX-F15-OPTS, MODEX-F15-OPTM series – User's Manual 26
▪
Sampling
: information about the sampling of incoming audio signal.
▪
Factory defaults
: you can set the
factory defaults values for the
selected port. Select it by pressing
Enter

button and approve it with
Enter

or cancel it with
Escape

.
Analog Audio Settings:
▪
Gain
: from 0 dB to +24 dB, step 3 dB (default is 0 dB)
▪
Volume
: from 0 dB to -63 dB, step 0.5 dB (default is 0 dB)
▪
Balance
: from 0 to 100%, step 1% (default is 50%=center)
▪
Type
: information about the type of incoming audio signal.
▪
Sampling
: information about the sampling of incoming audio
signal.
▪
Factory defaults
: you can set the
factory defaults values for the
selected port. Select it by pressing
Enter

button and approve it with
Enter

or cancel it with
Escape

.
Output Port Settings (O1, O2, ...)
The output port related settings are
available in this submenu. The number
of output ports depends on the installed
audio and video modules.
Digital or Embedded Audio Settings:
▪ Type
: information about the type of incoming audio signal.
▪ Sampling
: information about the sampling of incoming audio
signal.
▪ Factory defaults
: you can set the
factory defaults values for the
selected port. Select it by pressing
Enter

button and approve it with
Enter

or cancel it with
Escape

.
Analog Audio Settings:
▪
Volume
: from 0 dB to -52 dB (step 0.5 dB), from -54 dB to -66 dB
(step 2 dB); -69 dB; -72 dB; -78 dB (default is 0 dB)
▪
Balance
: from 0 to 100%, step 1% (default is 50%=center)
▪
Type
: information about the type of incoming audio signal.
▪
Sampling
: information about the sampling of incoming audio
signal.
Reset settings t
Enter:Yes Esc:No
Reset settings t
Enter:Yes Esc:No
¹Audio ports
½O1 (Return auº
Reset settings t
Enter:Yes Esc:No
Reset settings t
Enter:Yes Esc:No
Output Port Settings (O1, O2, ...)
ATTENTION! Output port settings depend on the installed video
output module. Different settings might be available for different
type of video modules.
The input port related settings are
available in this submenu. The number
of input ports depends on the installed
video input module. The following
settings and information can be reach
for each ports:
▪ HDCP mode
: You can set it to
Auto
or
Always
.
▪ Color space
: You can set it as
Auto
,
RGB
,
YUV 4:2:2
, or
YUV 4:4:4
.
▪ Resolution
: recent video resolution is displayed for the selected
port.
▪ Color info
: recent color info is displayed for the selected port.
▪ HDCP Active
: information about the incoming video signal is
HDCP-encrypted or not.
▪ Factory defaults
: you can set the
factory defaults values for the
selected port. Select it by pressing
Enter

button and approve it with
Enter

or cancel it with
Escape

.
ATTENTION! If the selected port is locked, parameters cannot be
changed.
INFO: Changed settings are saved immediately when selecting by
the buttons.
4.6.2. Audio Ports
Common Settings
You can set the audio mode of the
interface Module. It can be set to
Analog
,
Digital
or
Mixed
. More details about these
modes see in Audio Interface section.
Input Port Settings (I1, I2, ...)
The input port related settings are
available in this submenu. The number
of input ports depends on the installed
audio and video Modules.
Digital or Embedded Audio Settings:
▪
Type
: information about the type of incoming audio signal.
¹Video ports
¼O1 (DP Video)º
Reset settings t
Enter:Yes Esc:No
¹Audio ports
»Common settinº
¹Audio ports
½I1 (HDMI Audiº
▪
Factory defaults
: you can set the
factory defaults values for the
selected port. Select it by pressing
Enter

button and approve it with
Enter

or cancel it with
Escape

.
ATTENTION! If the selected port is locked, parameters cannot be
changed.
INFO: Changed settings are saved immediately when selecting by
the buttons.
4.6.3. Serial Ports
ATTENTION! Serial port settings are available just in case a serial
interface module is installed.
RS-232 / RS-422 port parameters can be
set by each available serial line.
Local Serial Port Settings
▪ Baud rate
: 4800 / 9600 / 14400 / 19200 / 28800 / 38400 / 56000
/ 57600 / 115200 / 128000 / 153600 / 230400 / 256000 /
460800
▪ Data bits
: 4 / 5 / 6 / 7 / 8 / 9
▪ Stop bits
: 1 / 1.5 / 2
▪ Parity
: None / Odd / Even / Always zero / Always one
▪ Command Injection
: Enabled / Disabled
▪ Command Injection port number
: default is 8001.
▪ Factory defaults
: you can set the
factory defaults values for the
selected port. Select it by pressing
Enter

button and approve it with
Enter

or cancel it with
Escape

.
Optical Link Serial Port Settings
▪
Factory defaults
: you can set the
factory defaults values for the
selected port. Select it by pressing
Enter

button and approve it with
Enter

or cancel it with
Escape

.
¹Port status & ¥
½Serial ports º
Reset settings t
Enter:Yes Esc:No
Reset settings t
Enter:Yes Esc:No
  
