Lightware HDMI20-OPTC series Скачать руководство пользователя

Страница: 30 / 75

5. Software Control – Using Lightware Device Controller

HDMI20-OPTC series – User's Manual

5.5. Port Properties Window

5.5.1. HDMI Input Port -Transmitter

By clicking on one of the HDMI input tile, the most important video related

information and settings are available in the port properties window.

Available Settings:

▪

Port name

▪

HDCP Enable (Disable HDCP input / Allow HDCP 1.4 only /

Allow HDCP 2.2 and HDCP 1.4).

Port number

max. HDCP version

HDCP 2.2

HDCP 1.4

▪

Reloading factory defaults (see more details in

Factory Default

Settings

section).

INFO: Factory default settings have not effect on the emulated EDID.

5.5.2. HDMI Output Port - Transmitter

Click on the local HDMI output port to open the port properties window. The

most important information and settings are available from the panel.

Available settings:

▪

Change the name of the port;

▪

Mute/unmute the port;

▪

Autoselect settings: enable / disable, mode, and priorities. (See

more details in

Autoselect Feature

section)

▪

Auto/DVI/HDMI signal type;

▪

Enabling the +5V: Auto / Always on / Always off;

▪

HDCP mode: Depends on input / Maximum possible

▪

Enable compatibility support of Panasonic TH-98LQ70

Depends on input:

The encryption level depends on the settings of the

input port and the source content/device. If the incoming signal is not

encrypted, then the outgoing signal will not be encrypted either.

Maximum possible:

The highest supported level of encryption.

▪

Factory default settings for the selected port.

Optical Output Port - Transmitter

Available settings (related to the transmitter):

▪

Change the name of the port;

▪

Mute/unmute the port;

▪

Autoselect settings: enable / disable, mode, and priorities. This

setting is always the same on both outputs. (See more details
in

Autoselect Feature

section)

▪

Auto/DVI/HDMI signal type;

▪

Factory default settings for the selected port.

Available settings (related to the receiver):

▪

Output 1 conversion mode: No conversion / Convert to YCbCr
4:2:0 / Split A: left, B: right / Split A: right, B: left. For more

information see

Output Conversion Modes

section.

▪

Output 1/A +5V enable: Auto / Always on / Always off

▪

Output 1/B +5V enable: Auto / Always on / Always off

▪

Output 2 +5V enable: Auto / Always on / Always off









Содержание HDMI20-OPTC series












































































Результаты поиска

Содержание HDMI20-OPTC series

Отзывы:

Похожие инструкции для HDMI20-OPTC series

Бренды по названию

Популярные бренды

Lightware HDMI20-OPTC series, Руководство пользователя

Результаты поиска

Содержание HDMI20-OPTC series

Отзывы:

Похожие инструкции для HDMI20-OPTC series

Бренды по названию

Популярные бренды