5. Software Control – Using Lightware Device Controller
HDMI20-OPTC series – User's Manual
31
5.5.3. Optical Input Port - Receiver
Available Settings:
▪
Port name;
▪
Reloading factory defaults (see factory default settings in the
section).
INFO: Factory default settings have not effect on the emulated EDID.
5.5.4. HDMI Output Port - Receiver
Available Settings:
▪
Change the name of the port;
▪
Mute/unmute the port;
▪
Auto/DVI/HDMI signal type;
▪
Enabling the +5V: Auto / Always on / Always off
▪
HDCP mode: Depends on input / Maximum possible
Depends on input:
The encryption level depends on the settings of the
input port and the source content/device. If the incoming signal is not
encrypted, then the outgoing signal will not be encrypted either.
Maximum possible:
The highest supported level of encryption.
▪
Output 1 conversion mode: No conversion /
Convert to YCbCr 4:2:0 / Split A: left, B: right / Split A: right, B: left.
For more information see
section.
INFO: Conversion mode setting effects only on HDMIOUT1A (O1)
and HDMIOUT1B (O2) port, so HDMIOUT2 (O3) port does not have
not this setting.
▪
Enable compatibility support of Panasonic TH-98LQ70
▪
Factory default settings for the selected port.