Lightware HDMI20-OPTC series Скачать руководство пользователя

Страница: 10 / 75

2. Installation

HDMI20-OPTC series – User's Manual

Installation

The chapter is about the installation of the device and connecting to other

appliances, presenting also the mounting options and further assembly steps:

Mounting Options

Connecting Steps

2.1. Mounting Options

Extenders can mount in several ways, depending on the application.

The can be mounted into the rack in pairs, receivers can be used

standalone. Rack ears also serve easy handling and bump protection,

mounting threads on top and one of the sides to conform strict

installation safety regulations.

ATTENTION!

To ensure the correct ventilation and avoid overheating

let enough free space in front of the appliance and keep the

ventilation holes free.

2.1.1. Truss Mounting - Receiver

Mounting thread on top and on one of the sides for safe and secure

installation. Rigging the handles with a safety wire rope is highly

recommended for safety reasons.

To order mounting accessories please contact

[email protected].

(Truss clamp and safety wire rope are not available at sales.)

M10x16mm

screw

M10x16mm

screw

2.1.2. Standard Rack Installation

Rack mounting kit includes all necessary accessories for

Standard Rack Installation

▪

2 pcs. rack ears,

▪

12 pcs. black, M4x8mm hexagon socket countersunk head
screws.

Rack mounting kit is not supplied with the product, it can be purchased

separately, please contact

[email protected]

Step 1.

Take two devices directly each other.

Step 2.

Two mounting holes on the front ears and two on the back of

the chassis is for fastening the two units to each other with 2x

2 pcs. M4x8 mm screws. This way you get a one-rack wide and

1U high device.

Transmitter 1.

Front side

Back side

Transmitter 2.

Transmitter 1.

Front rack ears

Transmitter 2.

M4x8 mm

screw

Front side

M4x6 mm screw

nut screw

M4x6 mm

screw

nut screw

M4x6 mm

screw

nut screw

M4x6 mm

screw

nut screw

M4x6 mm

screw

nut screw

Transmitter 2.

Transmitter 1.

Back side

M4x8 mm

screw

M4x8 mm

screw

M4x8 mm

screw

Содержание HDMI20-OPTC series












































































Результаты поиска

Содержание HDMI20-OPTC series

Отзывы:

Похожие инструкции для HDMI20-OPTC series

Бренды по названию

Популярные бренды

Lightware HDMI20-OPTC series, Руководство пользователя

Результаты поиска

Содержание HDMI20-OPTC series

Отзывы:

Похожие инструкции для HDMI20-OPTC series

Бренды по названию

Популярные бренды