Lightware HDMI20-OPTC series Скачать руководство пользователя

Страница: 3 / 75

HDMI20-OPTC series – User's Manual

Symbol Legend

The following symbols and markings are used in the document:

WARNING! Safety-related information which is highly

recommended to read and keep in every case!

ATTENTION!

Useful information to perform a successful procedure;

it is recommended to read.

INFO: A notice which contains additional information. Procedure

can be successful without reading it.

DEFINITION: The short description of a feature or a function.

TIPS AND TRICKS: Ideas which you may have not known yet but can

be useful.

Navigation Buttons

Go back to the previous page. If you clicked on a link previously,

you can go back to the source page by clicking the button.

Navigate to the Table of Contents.

Step back one page.

Step forward to the next page.








Document Information

All presented functions refer to the indicated products. The descriptions

have been made during testing these functions in accordance with the

indicated Hardware/Firmware/Software environment:

Item

Version

Lightware Device Controller (LDC) software

1.26.1

Lightware Device Updater2 Software

1.2.2

Controller firmware

1.2.0

Hardware

1.2

Document revision:

1.2

Release date: 01-04-2019
Editor: Judit Barsony

About Printing

Lightware Visual Engineering supports green technologies and

eco-friend mentality. Thus, this document is made for digital usage

primarily. If you need to print out few pages for any reason, follow the

recommended printing settings:

▪

Page size: A4

▪

Output size: Fit to page or Match page size

▪

Orientation: Landscape

TIPS AND TRICKS: Thanks to the size of the original page, the

border around the content (grey on the second picture below)

makes possible to organize the pages better. After punching the

printed pages, they can be placed easily into a ring folder.









Содержание HDMI20-OPTC series












































































Результаты поиска

Содержание HDMI20-OPTC series

Отзывы:

Похожие инструкции для HDMI20-OPTC series

Бренды по названию

Популярные бренды

Lightware HDMI20-OPTC series, Руководство пользователя

Результаты поиска

Содержание HDMI20-OPTC series

Отзывы:

Похожие инструкции для HDMI20-OPTC series

Бренды по названию

Популярные бренды