LightPointe AireLink 60, Инструкция по установке и эксплуатации

Страница: 111 / 133

AireLink

60 Installation and User Manual Rev. D CLI -- Command Line Interface
Page 111
Set IP address:
Example:
airelink60(config)# interface management ip 192.168.1.10
Note: When management port IP address is changed, the new setting will occur immediately. At that
point one will need to connect to the CLI again using new IP address setting.
Set Network Mask address:
Example:
airelink60(config)# interface management netmask 255.255.255.0
Set Default Gateway:
Example:
airelink60(config)# interface management gateway 192.168.1.1