LightPointe AireLink 60, Инструкция по установке и эксплуатации

Страница: 106 / 133

AireLink

60 Installation and User Manual Rev. D CLI -- Command Line Interface
Page 106
Command:
airelink60(config)# radio distance {?|standard|short|veryshort}
Description: Set radio deployment distance
? Show available command options
standard
Set power setting for standard distance (default)
short Set power setting for short distance
veryshort Set power setting for very short distance
Example:
airelink60(config)# radio distance short
-----------------------------------------------------------------------------------------------------------
Command:
airelink60(config)# radio loopback {?|mode|mac-swap|timeout}
Description: Sets radio loopback mode
? Show available command options
mode Set modem loopback mode
mac-swap Set modem loopback mode and swap the MAC address
timeout Set modem loopback timeout/reset in x seconds
Example:
airelink60(config)# radio loopback mac-swap
-----------------------------------------------------------------------------------------------------------
Command:
airelink60(config)# radio modulation {?|0|1|…|9}
Description: Sets radio modulation scheme according to MCS values
? Show available command options
# 0 - BPSK 1/2 ; 1 - BPSK 5/8 ; 2 - BPSK 3/4
3 - BPSK 13/16 ; 4 – QPSK 1/2 ; 5 - QPSK 5/8
6 - QPSK 3/4 ; 7 - QPSK 13/16 ; 8 - 16QAM 1/2
9 - 16QAM 5/8
Example:
airelink60(config)# radio modulation 9
-----------------------------------------------------------------------------------------------------------
Command:
airelink60(config)# radio rssi_alarm_thr {?| value in dBm }
Description: Sets radio RSSI alarm threshold in dBm
Example:
airelink60(config)# radio rssi_alarm_thr -60