LightPointe AireLink 60, Инструкция по установке и эксплуатации

Страница: 107 / 133

AireLink

60 Installation and User Manual Rev. D CLI -- Command Line Interface
Page 107
Command:
airelink60(config)# radio rssi_alarm_clear {?| value in dBm }
Description: Sets radio RSSI alarm clear threshold in dBm
Example:
airelink60(config)# radio rssi_alarm_thr -50
-----------------------------------------------------------------------------------------------------------
Command:
airelink60(config)# radio rx_band {?| 59.0|59.5|60|62.0|62.5|63.0 }
Description: Sets radio receive band for low band unit { 59.0|59.5|60} and high band unit
{62.0|62.5|63.0 }
Example:
airelink60(config)# radio rx_band 59. 0
------------------------------------------------------------------------------------------------------------
Command:
airelink60(config)# radio tx_band {?| 59.0|59.5|60|62.0|62.5|63.0 }
Description: Sets radio transmission band for low band unit { 59.0|59.5|60} and high band unit
{62.0|62.5|63.0 }
Example:
airelink60(config)# radio tx_band 62.0
-----------------------------------------------------------------------------------------------------------
Command:
airelink60(config)# radio statistics reset {?}
Description: Resets the RMON counters
Example:
airelink60(config)# radio statistics reset
7.3.5 SNMP Commands
Command:
airelink60(config)#
snmp {?|community ro get_community_string |community rw
set_community_string |trap-table [add ip_address |delete ip_address ]}
Description: Show system status information
?
Show available command options
Community ro Set SNMP get community
Community rw Set SNMP set community
trap-table add Add SNMP trap destination IP address
trap-table delete Delete SNMP trap destination IP address
Example:
airelink60(config)# snmp get-community public