LightPointe AireLink 60, Инструкция по установке и эксплуатации, Страница: 102 / 133

AireLink

60 Installation and User Manual Rev. D CLI -- Command Line Interface
Page 102
Command:
airelink60(config)# interface data speed {?|10|100|1000}
Description: Set network data interface Ethernet speed
? Show available command options
10
Set speed to 10 Mbit/s
100 Set speed to 100 Mbit/s
1000 Set speed to 1000 Mbit/s
Example:
airelink60(config)# interface data speed 1000
Command:
airelink60(config)# interface data duplex {?|full|half}
Description: Set data network interface duplex status
? Show available command options
full
Set full duplex
half Set half duplex
Example:
airelink60(config)# interface data duplex full
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Command:
airelink60(config)# interface data flowcontrol {?|enable|disable}
Description: Set network data interface control flow status
? Show available command options
enable Enable flow control
disable Disable flow control
Example:
airelink60(config)# interface data flowcontrol enable
7.3.1.2 Interface management commands
Command:
airelink60(config)# interface management duplex {?|full|half}
Description: Set network management interface duplex mode
? Show available command options
full Set full duplex
half
Set half duplex
Example:
airelink60(config)# interface management duplex full
-----------------------------------------------------------------------------------------------------------------------------------------------------------