LightPointe AireLink 60, Инструкция по установке и эксплуатации

Страница: 109 / 133

AireLink

60 Installation and User Manual Rev. D CLI -- Command Line Interface
Page 109
7.3.7 Reboot Command
Command:
airelink60(config)# reboot
Description: Executing this command will reboot the system
Example:
airelink60(config)# reboot
7.3.8 Exit Command
Command:
airelink60(config)# exit
Description: Exit Configuration mode
7.4 CLI -- SAVE SESSION SETTINGS ON FLASH AND SOFTWARE UPGRADE
Command:
airelink60>copy {?|running-config|startup-config|flash|tftp}
Description: Copy file from one location to another. First field in the command is the “copy from”
option. Second field in the command is the “copy to” option.
? Show available command options
? before the first field shows “Copy from” options
? after the first field shows “Copy to” options
“Copy to/from” options are the same as shown below
running-config Current system configuration
startup-config Startup system configuration
To save the changes in the system configuration that was done during the CLI session the following
CLI command should be executed:
Example:
airelink60> copy running-config startup-config
This will copy all the changes to the flash to preserve new settings after the reboot.