LIFT-A-LOFT APX16 - G
ASOLINE
CHAPTER 2
SECTION 3
Page 12
09-26-02
12. ACCELERATOR CABLE AND PEDAL:
Removal:
(1)
From underneath the vehicle, pull the boot back to expose the cable
attachment.
(2)
Loosen the jam nuts at the cable end and remove it from its mount.
(3)
From inside the cab, remove the bolts securing the pedal assembly to the
floor and lift it upward to remove.
Installation:
(1)
Reverse the above procedure.
(2)
Be sure to check the throttle cable adjustment before returning the vehicle to
service.
(3)
Note: Throttle pedal travel can be adjusted by turning the pedal stop bolt in
or out as needed.
13. EXHAUST SYSTEM:
Removal:
(1)
To remove individual components, loosen any clamps attached to that part.
(2)
Remove any bracket bolts if a mounting band is securing the part.
(3)
Twist the part to free the connection between it and the adjacent
components and remove.
(4)
For the forward exhaust pipe (in front of radiator) section, remove the bolts
and/or nuts from the exhaust flanges prior to removal.
Installation:
(1) Reverse the above procedure as it applies to each component.
14. STEERING AXLE:
Removal:
(1)
Elevate the APX16 by supporting either its frame rails or the front and rear
bumpers.
(2)
Remove both front wheels.
Property of American Airlines
