manualshive.com logo in svg

LiCONiC StoreX Series, Руководство по эксплуатации

Поделиться
Скачать
LiCONiC StoreX Series Скачать руководство пользователя страница 8

 

StoreX

 

Series

  

 STX_V078.doc 

7

 CMa, 

23.11.2009 

1.10 

Safety - Basics 

1.10.1 

General Operating Hazards 

Carefully observe the following precautions: 

1.10.2 Mechanical 

Hazards 

Keep the housing and safety panels closed and never reach into the instrument 
work space when the unit is in operating mode. 

1.10.3 

Chemical, Biological and Radioactive Hazards 

All samples and test-kit components must be considered as potentially 
hazardous agents. Therefore, a potential risk may arise from the liquids being 
handled, such as infectious biological samples, toxic or corrosive chemicals, or 
radioactive substances. Strictly apply appropriate safety precautions according to 
local, state and federal regulations. 

Prior to any first time application, test runs should be made with a neutral liquid to 
allow optimization of all liquid handling parameters. 

Handling and disposing of waste has to be in accordance with all local, state and 
federal environmental, health and safety laws and regulations. 

Prior to executing any maintenance task on the instrument or sending it, or parts 
of it for repair, the instrument or the parts have to be thoroughly decontaminated. 

1.11 

General Safety Regulations 

1.11.1 Legal 

Requirements 

Please consult the Manufacturer's Declaration, delivered with each unit by 
LiCONiC AG, listing all applied directives and standards. 

In Europe, the System Integrator must provide a Conformity Declaration upon 
final installation of the entire system. 

1.11.2 

General Inspection and Maintenance Duties 

Only an authorized System Integrator shall carry out inspection, maintenance 
and repair tasks. 

1.11.3 

Spare Parts to be used 

Only original LiCONiC Spare Parts may be used. If other parts are used during 
the normal warranty period, the manufacturer's guarantee may be invalidated. 

1.11.4 Modifications 

Modifications shall only be carried out by an authorized System Integrator. 
LiCONiC AG will not accept responsibility for any claim resulting from 
unauthorized modification or alteration. 

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание StoreX Series


































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды