manualshive.com logo in svg

LiCONiC StoreX Series, Руководство по эксплуатации

Поделиться
Скачать
LiCONiC StoreX Series Скачать руководство пользователя страница 6

 

StoreX

 

Series

  

 STX_V078.doc 

5

 CMa, 

23.11.2009 

1. 

About the Product and its Manual 

1.1 Intended 

Use 

The LiCONiC StoreX is intended for storage, identification and transfer of 
Microplates. It is to be applied exclusively in the research field. The LiCONiC 
StoreX is intended to work as an element in an automated system. 

1.2 Unintended 

Use 

Due to its open architecture, the LiCONiC StoreX is NOT intended for clinical and 
diagnostic applications. These applications would be carried out by less qualified 
people, exposing them to dangerous liquids in the case of instrument 
malfunction. 

Read the safety instructions in this Manual carefully. 

1.3 Product 

Identification 

The Type Plate is located at the rear of the LiCONiC StoreX 

 

For future reference, please read the instrument Serial No. on the rear of your 
instrument and write it in the provided space. 

1.4 

Scope of Delivery 

• 

Basic Unit, consisting of the Plate Handling, the Gate and the Incubation 
chamber 

• 

Product Documents 

• 

Cables 

• 

User Software and Drivers 

• 

Stackers (as specified) 

• 

Transfer Station (as specified) 

 

1.5 General 

The LiCONiC StoreX is not a complete product for end use. It is delivered 
exclusively to professional System Integrators who take full responsibility for safe 
installation and documentation of the entire system. 

Do not operate until it has been established that the system, into which the 
LiCONiC StoreX has been incorporated is in compliance with all local safety 
regulations. 

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание StoreX Series


































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды