manualshive.com logo in svg

LiCONiC StoreX Series, Руководство по эксплуатации

Поделиться
Скачать
LiCONiC StoreX Series Скачать руководство пользователя страница 54

 

StoreX

 

Series

  

 STX_V078.doc 

53

 CMa, 

23.11.2009 

6.4.9 

Integrated StoreX Gassing Safety Features 

There are a number of safety mechanisms implemented in the StoreX application 
that protect the user from unwanted exposure to gases.. Even in the case of 
failure or operation errors these mechanisms can ensure safe shut-off of the gas 
inlet. The optimum arrangement should  be selected according to the level of 
accuracy, danger and specified settling time. The level of safety depends on the 
type of gassing option. 

The continuous flow system has a minimal of safety functions. The exhaust limits 
gas leaking into the surrounding environment. A slight underpressure on the 
exhaust will also lower uncontrolled gas flow into the surrounding environment. 
The safety elements of the continuous flow system simply limit the gas flow and 
protect against overpressure to some extent. This system may not be used in an 
higher risk environment. 

A significantly higher standard of safety is provided by the open loop.system. In 
addition to the basic flow and pressure protection, the gas flow is by the system. 
This results in a significantly higher level of safety and in a reduction of gas 
consumption. 

 

The above flowchart lists the steps that are implemented to avoid unwanted gas 
emissions. As a first step the gas is always shut-off when the glass door is open. 
This will eliminate the risk of large amounts of gas exiting when the user door is 
opened.  The same applies to the Gate. However, because of its smaller size 
some gas flow is allowed even when the Gate is open. A Gate timeout is 
implemented cutting gas flow when the Gate has been opened for an excessive 
period of time. An additional general safety step is the gassing timeout. A gassing 
timeout will occur when the solenoid is opened over a limited period of time. 

An even greater level of safety can be achieved by the closed loopsystem. By 
actually measuring and displaying the gas concentration possible errors or 
malfunctions can be detected by the system. If the specified gas concentration is 
not reached within a certain time limit the gas flow is shut-off and a error flag is 
set. A display will inform the operator as to the correct operation of the system.  

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание StoreX Series


































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды