L'HOTELLIER 12589-01 Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 102

background image

L'HOTELLIER

COMPONENT MAINTENANCE MANUAL

12589-( )

PRINTED IN FRANCE

26-20-50

Page 7001
APR 01/11

ASSEMBLY

TASK 26-20-50-400-801-A01
1. General

-

CAUTION: ONLY L’HOTELLIER MANUFACTURED/SUPPLIED SPARE PARTS AND
COMPONENTS SHALL BE USED IN ACCORDANCE WITH THIS CMM

-

L’HOTELLIER HAS NOT APPROVED ANY COMPONENTS OR SUBSTITUTE PARTS OF ANY
KIND, OTHER THAN THOSE LISTED WITHIN THIS CMM. THE USE OF ANY SPARE PART
OR COMPONENT OTHER THAN THOSE SPECIFIED WITHIN THIS CMM IS NOT AUTHORIZED
BY L’HOTELLIER AND REPRESENTS NONCOMPLIANCE WITH THE PROCEDURES
DEFINED IN THIS CMM.

-

THE USE OF NON-LHOTELLIER PARTS WILL VOID ANY AND ALL WARRANTIES.
L’HOTELLIER WILL NOT ACCEPT RESPONSIBILITY OR LIABILITY FOR ANY PMA OR OTHER
SUBSTITUTE PARTS OF ANY KIND, OTHER THAN L’HOTELLIER MANUFACTURED/SUPPLIED
PARTS ; NOR WILL L’HOTELLIER ACCEPT RESPONSIBILITY OR LIABILITY FOR ANY OF THE
L’HOTELLIER END ITEM PRODUCTS THESE PARTS ARE INSTALLED ON/IN

-

FURTHERMORE L’HOTELLIER INDEMNIFIES AND HOLDS ITSELF HARMLESS FROM ANY
PERFORMANCEE CLAIM OR EXPECTATION, AND ANY FAILURE AND/OR CONSEQUENCE
THEREOF ASSOCIATED WITH THE FUNCTIONNALITY AND PERFORMANCE OF L’HOTELLIER
PRODUCTS WHEN/IF NON-L’HOTELLIER PMA OR SUBSTITUTE PARTS ON ANY
KIND ARE USED ON/IN L’HOTELLIER PRODUCTS.

A.

This section gives the assembly procedures, the sequence of assembly, and the materials
necessary to assemble components. Always assemble components in the specified sequence.
Ignore the assembly instructions for components that were not disassembled or removed. See
the Illustrated Parts List (IPL) for the location of the parts

TASK 26-20-50-940-805-A01
2.

Tools, Fixtures, Equipment and Materials

NOTE : Refer to SPECIAL TOOLS, FIXTURES, EQUIPMENT AND CONSUMABLES section for the

specifications and where to get the necessary tools.

NOTE : You can use equivalent alternatives for the items given in table.

The document reference is online, please check the correspondence between the online documentation and the printed version.

«
...
61
62
63
64
65
...
»

Содержание 12589-01







































































































Отзывы:

Нет отзывов

Похожие инструкции для 12589-01

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды