LG GLOFA-GM Series, Руководство пользователя, Страница: 254 / 358

Chapter 8 Exercising program
8-3
Item Setting contents Remark
Communication speed 9600 BPS Identical to Cnet I/F module
Data type Asynchronous 10 bits Data-8bits/Start-1bit/Stop-1bit
RTS-CTS delay 0 msec Set to the smallest value
DTR control Forced ON
Comm mode 4-line type As agreed with the dedicated line spec.
3) Setting of basic parameters
Mode and basic parameters need setting for TM master slave communication. [Table 8.2] describes setting
items for this. For dedicated modem communication, apply setting to RS-232C channel.
[Table 8.2] Setting items
Setting item TM master module TM slave module Remark
Module name G3L-CUEA G4L-CUEA
Channel mode Stand-alone mode Stand-alone mode
Operation mode
[Note1]
‘3’ : dedicated mode Ver.2.0 ‘3’ : dedicated mode
RS-232C station No. Basic value(Not used) 0 ~ 7 station available
RS-232C
communication type
Dedicated modem
RS-232C
communication speed
9600 BPS/DATA 8 bits/START 1 bit/STOP 1 bit
RS-232C
channel setting
only valid
Remark
[Note1] Cnet I/F module in TM master side shall be of Ver.2.0 or later as is in dedicated master mode to
communicate. TM slave side as used in dedicated mode slave is available regardless of the version.
Next is setting screen of Frame Editor to be set as in [Table 8.2].