manualshive.com logo in svg

LG 43UV770M, Руководство по настройке коммерческого режима

Поделиться
Скачать
LG 43UV770M Скачать руководство пользователя страница 7

7

206-4324

Commercial Mode Overview

This document describes how to set up UV770M Pro:Centric 

®

 TVs for Commercial Mode operation.  

LG commercial TV functionality is based on “ownership” of the Channel Map; that is, the Channel Map 

resides in the TV’s CPU, Protocol Translation Controller (PTC), or embedded 

b

-LAN™ (EBL) module, or  

it resides in a Pro:Centric application or an external device from the solution provider. 
These TV models support several different operational modes: LG’s Free-To-Guest (FTG) Mode via the 

TV CPU, FTG Mode via the TV’s EBL module, Application Tuning Mode (ATM) with Pro:Centric application,  

or Pass-through Mode (default). When in Pass-through Mode, these TV models can also be externally 

controlled via Multiple Protocol Interface (MPI) or TV-Link Monitor (TLM) interface.

Setup Checklist

Note:

 This document provides information specific to Commercial Mode operation. Refer to the Owner’s 

Manual and/or Easy Setup Guide for information on TV installation and hardware and cable connections. 

Installation

__  Unpack TV and all accessories.

__  Install batteries in the Installer Remote.

__  Install TV on VESA mount or stand.

 

Note:

 It may be advisable to make all cable 

connections before installing on VESA mount  

or stand, as appropriate.

Hardware Connections

__  Install any additional hardware as  

appropriate to your institution, LAN, etc.

Cable Connections

__  Make all rear jack panel connections, as  

appropriate.

Commercial Mode Setup

__  Complete appropriate procedures as described  

in this document for Commercial Mode operation. 

Pass-through Mode 

This mode allows you to configure individual TVs for Pro:Centric and/or FTG Mode via CPU operation 

or create a Master TV Setup for cloning purposes. This mode also allows external control via the GAME 

CONTROL/MPI port or the TLM (CONTROL & SERVICE) port on the TV rear jack panel. 
There are three methods for configuring individual TVs that are currently in Pass-through Mode: using 

one of the two LG First Use Wizard options or using the Custom Master TV Setup procedure.

LG First Use

 Wizard Configuration

When the TV is in a factory default state, the LG First Use Wizard

 provides the following two configuration 

options. See “LG First Use Wizard” on pages 17 to 18 for further information.
•  The EZ-Manager Wizard

 provides automated or manual options for configuring Pro:Centric operation 

and also provides the option to configure the TV using a USB memory device.

• 

The Express Script provides streamlined configuration of the TV for FTG Mode via CPU operation with 

Hospital Mode features 

(including pillow speaker setup) and also provides the option to configure the TV 

for Pro:Centric operation. 

Custom Master TV Setup 

Unlike the guided process above, the Custom Master TV Setup procedure enables you to create a  

customized Master TV Setup for cloning purposes for TVs that are to remain in Pass-through Mode. Use 

the Installer Remote to c

onfigure Installer Menu items as required for TV operation and set up TV features 

(Picture, Sound, Channels, etc.). See “Custom Master TV Setup” on pages 55 to 57 for detailed information.

Содержание 43UV770M




























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды