104
206-4324
Reference: Using Media Share Features (Cont.)
Screen Share (Miracast / WiDi)
The following steps describe how to access and use the Miracast / WiDi features.
1. Turn ON the TV, and then use one of the following methods to access the Screen Share application,
depending on the current configuration of the TV:
• If the Pro:Centric application is not loaded, press
PORTAL
on the Installer Remote, and use the Left/
Right arrow keys to select
Screen Share
from the TV’s Smart Launcher.
• If the Pro:Centric application is loaded, press
MENU
on the Installer Remote to display the Function
Menu, use the Up/Down arrow keys to select/highlight the
General
menu icon, and then press
OK
. In
the General Menu, use the Up/Down arrow keys to select
Screen Share
.
Note:
Depending on the remote control being used (in any mode), you may also access the Smart
Launcher via the SMART button.
Note:
If Screen Share is currently not available in the Smart Launcher or in the General Menu (the latter
applicable to FTG Mode only), you may need to turn OFF another Media Share feature in order to use
Screen Share. For example, access the General Menu and make sure that SoftAP is turned OFF. See
also note on page 102 regarding simultaneous use of Media Share features.
2. Follow the on-screen instructions to initiate the Miracast / WiDi connection from your Miracast / WiDi
device. Note that you may be prompted to enter a PIN number that appears on the TV screen into your
Miracast / WiDi connection window to complete the connection.
Once the connection is established, the TV display may be used as a second screen for the Miracast /
WiDi device.
DIAL
The following steps describe how to access and use DIAL. Remember that the device used MUST be
connected to the same network as the TV.
Note:
DIAL may only be used with device applications for which a TV-compatible application (for
example, YouTube) has been created/selected for inclusion in the Pre-loaded Apps Menu (see “Pre-loaded
Applications” on page 81).
Note:
The applications that may be used in conjunction with DIAL are only accessible from the TV’s
Smart Launcher. If the TV is not in Pass-through Mode, you will need a remote with a SMART button in
order to display the Smart Launcher.
1. Turn ON the TV, and then use one of the following methods to display the TV’s Smart Launcher,
depending on the current configuration of the TV:
• If the Pro:Centric application is not loaded, press
PORTAL
on the Installer Remote.
• If the Pro:Centric application is loaded, press
SMART
on the Installer Remote (see note above
regarding remote with SMART button).
2. Use the Left/Right arrow keys on the Installer Remote to select the desired application, and then press
OK
.
3. On your device, launch the same application, and use the appropriate options (typically available via
Settings) to initiate a connection/pairing with the TV. You may also need to access the Settings options
from the application on the TV to complete the pairing operation. Follow the on-screen instructions.
Once the connection/pairing is successful, you will be able to view media from the application on the TV.
