LG-Ericsson LIP-8002 Скачать руководство пользователя страница 90

Страница: 90 / 108

LIP-8002/8002A

iPECS

Installer

Guide

Section

Field Name

Description

dst_stop_week_of_month

Sets week of month DST ends.
Valid values are 1 to 6 and 7, with 1 being the first week,
each number thereafter being subsequent weeks. Seven (7)
represents the last week in the month
The default is 1 for the United States.

dst_stop_time

Sets the hour of the day DST ends.
Valid values are 0 to 23.
The default is 2 for the United States.

outbound_proxy_server

When defined, sends all SIP requests to the outbound proxy

server instead of to the line

_proxy_address. The media

stream is not routed through the outbound proxy.
The valid value is an IP address or FQDN.
Default is blank

outbound_proxy_port

Defines the port number of the outbound proxy server.
Valid values are 1024 to 32000.
Default is 5060.

backup_proxy_server

Defines a backup proxy server in case the outbound proxy
server fails.
The valid value is an IP address or FQDN
Default is blank

back_proxy_port

Defines the port number of the backup proxy server.
Valid values are 1024 to 32000.
Default is 5060.

message_url

Defines the voice mail address, IP address or phone number
format.
The valid value is an IP address or telephone number.
Default is blank.

SIP_service_domain

Specifies the SIP service domain.
The valid value is an IP address or FQDN.
The default is blank.

preferred_codec

Defines the order of priority of codecs for negotiation.
Valid values are g729, pcmu and pcma.
The default order of priority is g729 pcmu pcma.

rtp_port

Defines the RTP port for media packets.
Valid values are from 16300 to 32700.
The default is 23000.

outbound_proxy_register

Enables use of proxy server for SIP requests.
Valid values are enable or disable.
The default is enable.

prack_mode

Disables the use of ACK response to provide reliable
response to SIP requests.
Valid values are enable or disable.

Default is disable.

user_param

Defines “user=phone” parameter in the To, From, and
Contact headers of REGISTER messages.
Valid values are disable and enable.
Default is disable.

replaces_mode

Enables use of the SIP “Replace” header.
Valid values are enable or disable.
Default is enable.

VOIP

local_udp_port

Defines UDP port used for SIP messages.
Valid values are from 1024 to 32000.
Default is 5060.

Содержание LIP-8002













































































































Результаты поиска

Содержание LIP-8002

Отзывы:

Похожие инструкции для LIP-8002

Бренды по названию

Популярные бренды

LG-Ericsson LIP-8002, Руководство по установке

Результаты поиска

Содержание LIP-8002

Отзывы:

Похожие инструкции для LIP-8002

Бренды по названию

Популярные бренды