LG-Ericsson LIP-8002, Руководство по установке, Страница: 65 / 108

LIP-8002/8002A
iPECS Installer Guide
59
o
DTMF Payload sets the RFC 2833 payload type for DTMF signals.
o
DTMF Duration sets the duration of DTMF signals sent from the phone in milli-
seconds.
o
Lock Outgoing Call locks the IP Phone, requiring password entry to place a call.
o
Use Speed Number enables or disables use 2-digit dialing to dial Phone Book
contacts.
o
Key Tone enables or disables the tone generated when a button on the IP Phone
is pressed.
o
Line Lock Out gives a beef notification after disconnect tone when the call is
terminated.
-
Functions
o
Download Flag enables the display of the S/W and configuration download flags
functions under the LCD Configuration Menu, see section 3.6.8.4 or section
3.6.8.5 , respectively
o
One-touch Pickup enables the call connection by selecting call on LCD using the
navigation button when there are multi calls. Disabling One-touch Pickup causes
the IP Phone to display the call status when a call is selected; the call does not
connect to the speakerphone or handset unless the
OK button is pressed a
second time. This may be useful when the user cannot distinguish LED colors
-
Ring Settings
o
Ringer Type sets the default ring type, select one of 4 ring signals for audible
notification of incoming calls,
o
Trunk Ringer Type sets the ring type for incoming call from trunk line, select one of
4 ring signals, ringer off or default ring.
o
Ringer turns the ring signal On or Off.
To modify Phone Setting parameters:

Select the parameter.

Enter the new value or select a value from the drop-down menu.

When complete select button.
Changing DTMF Duration or Frame Duration requires a reboot of the IP Phone. When
you leave the menu, you will receive a Reboot notice. The IP Phone must reboot to
utilize the new values entered.