LIP-8002/8002A
iPECS
Installer
Guide
30
Press the
digit, or move the cursor to
3.Phone Settings
using the navigation buttons and
press the
OK
button.
Press the
digit, or move the cursor to
4.Flexible Button
using the navigation buttons and
press the
OK
button.
Select the desired flexible button.
Select a function using
Up
/
Down
navigation button and press the
OK
button. Refer to the
Table 3.6.5-1
Flexible Button Functions.
If the selected function is Speed dial, enter the speed number and press the
OK
button.
Each flexible button can have its own label, enter the label and press the
OK
button to save
the entry.
Move to another parameter with the navigation buttons and continue the session or press the
Settings (
) button to exit the configuration session.
To enter alphanumeric characters select the
Mode
button. Refer to
Appendix E
for the
character mapping of dial pad digits.
3.6.5 Time Configuration
Within the
Time Configuration
menu, the IP Address or FQDN of the desired Simple Network
Time Protocol (SNTP) server and the local time zone are defined. In addition, Daylight Savings
Time (DST) is disabled.
The following SNTP server addresses or other private SNTP server addresses may be used for
Time Configuration:
-
clock.via.net
-
ntp.nasa.gov
-
tick.ucla.edu
3.6.5.1 SNTP Server Address
SNTP is a standard protocol that permits a network device to obtain the network’s current time.
For operation with SNTP, the IP Phones require an SNTP server IP address or FQDN.
To assign the SNTP Server Address:
Press the Settings (
) button.
Press the
digit, or move the cursor to
3.Phone Settings
using the navigation buttons and
press the
OK
button.
Press the
digit, or move the cursor to
5.Time Configuration
using the navigation buttons
and press the
OK
button.
Press the
digit, or move the cursor to
1.SNTP Server Address
using the navigation
buttons and press the
OK
button.
Input the SNTP Server Address using the dial pad and press the
OK
button to save the
entry.