Lexmark X95 series, Руководство по обслуживанию

Страница: 378 / 1182

3-26
Service Manual
7558- xxx
Go Back
Previous
Next
OUTPUT BIN TESTS
Feed Tests (Output Bin)
This test is used to verify that media from the device’s default input source can be fed to a specific output bin. No
information is printed on the feed test pages.
To run the Feed Tests for the output bins:
1. From the Diagnostics Menu, navigate to
OUTPUT BIN TESTS
.
2. Touch
Feed Tests
.
3. Touch the output bin you want the paper to exit into. The standard bin as well as any output option bin
installed on the printer is shown on the menu.
• Standard Bin
• Output Bin [1-3]
4. Touch either
Single
or
Continuous
.
•
Single
—Feeds one sheet of media from the selected source.
•
Continuous
—Media continues feeding from the selected source until
Stop
is pressed.
Press
Stop
to return to the [Selected Output Bin].
While this test runs,
[Selected Output Bin] Feeding...
appears on the LCD. During Single tests, no buttons
are active. However, during Continuous tests, you can press
Stop
to cancel the test.
Feed To All Bins
This test is used to verify that the device can feed media to all installed output destinations. No information is
printed on the feed test pages since the printhead LED is not engaged during this test.
PRINT TESTS
This menu’s settings enable a user to test the device’s ability to generate printed output from each of its installed
input sources and to test the device’s current print quality.
[Input Source] Print Test
After a user selects an input source to test, the panel displays two testing options:
Single
or
Continuous
. A
Single test feeds one sheet of media from the selected input and prints a test page on it; the Continuous test
continuously feeds media from the selected input and prints test pages until the user presses
Stop
. During a
Single test, none of the panel’s buttons are active while the test page prints.
To run this test:
1.
From the Diagnostics Menu, navigate to
PRINT TESTS
.
2.
Select the input source from the following choices:
•
Tray 1
•
Tray 2
•
Tray 3
•
Tray 4
•
Multi-Purpose Feeder)
3.
Touch either
Single
or
Continuous
.
•
Single
—Feeds one sheet of media from the selected source.
•
Continuous
—Media continues feeding from the selected source until
Stop
is pressed.
Print Quality Pages (Diagnostics Menu)
This setting enables a user to view the values of a broad range of the device’s settings and to test the device’s
ability to generate acceptable printed output.