Lexmark X95 series Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 1182

Lexmark X95 series Скачать руководство пользователя страница 31

Preface

xxxi

7558-

xxx

Go Back

Previous

Next

Change history

Revision date

Updates

2014/11/20

Added scanner calibration information in the

“Diagnostics Menu” on page 3-17

.

2014/10/10

Removed the Registration topic from the Diagnostic aids chapter.

2014/09/05

• Updated the 121.04, 121.06, and 121.08 service checks in the Diagnostics information

chapter.

• Added PN 40X6091 in the parts catalog.

2014/08/12

Parts catalog assembly 9—Deleted part numbers 40X6973 and 40X6307, and replaced

them with 40X9241.

2014/05/05

• Updated

“Booklet maker 2” on page 7-87

, removed the booklet controller card in the

art and table.

• Updated

“Finisher—electronics” on page 7-84

, added the booklet controller card in

the art and table.

2014/01/10

Changed PN 40X0727 to 40X6676 for the Sensor (Tray module feedout) in Assembly 37:

TTM media feed 2 of the parts catalog.

2013/12/05

• Updated description for error code 121.12 to “Fuser failure” from “Incorrect fuser.”
• Updated the action description to “Wrong fuser is possibly installed or fuser drive PCBA

has failed” from “Wrong fuser is installed.”

• Updated

“121.12 Fuser failure” on page 2-62

.

2013/11/4

Parts catalog Assembly 55: Changed P/N to 40X7464 to 40X6726.

2013/10/21

Parts catalog Assembly 37:

• Updated description of 40X7334
• Added 40X0588 and 40x0727
• Deleted 40X7336, 40X7337, and 40X7338

2013/10/7

Replaced 40X7511 with 40X7512 in Parts catalog Assembly 108.

2013/9/4

Replaced 40X0727 with 40X7334 in the Parts catalog Assembly 37.

2013/08/01

• Updated Parts catalog Assembly 37.
• Added “Steps before starting the 9yy service checks”.

2013/07/11

• Updated the Bridge PCBA (MFP) part number.
• Added the following error codes and service checks: 146, 324, 334, 344, and 354.

2013/04/26

• Updated Assembly 62 to show the proper orientation of the parts catalog illustration.
• Added the rear lower cover removal procedure before the step “Disconnect the input

option cable (A)” in the repair chapter.

2013/02/25

Updated Assembly 18 of the parts catalog to the show proper order of the augers.

2012/08/15

Replaced part number 40X7421 to 40X8663 in

“Finisher—stacker bin lift” on page 7-73

of the parts catalog.

2012/08/01

Updaed the Bridge PCBA (MFP) part number in

“Electrical 1” on page 7-57

of the parts

catalog.

2012/07/02

Added part number 40X0580 in

“Media feed 1” on page 7-27

,

“TTM trays” on page 7-36

,

and

“Tray module media feed” on page 7-31

in the parts catalog.

«
...
29
30
31
32
33
...
»

Содержание X95 series































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов