Lexmark X95 series, Руководство по обслуживанию

Страница: 359 / 1182

Diagnostic aids
3-7
7558- xxx
Go Back
Previous
Next
Action for prompts
This setting enables users to determine which input source would receive paper-related or envelope-related
change prompts when they occurred. Regardless of the target source, the device always requires some type of
user assistance to resolve the change prompt (examples: pushing a button to ignore the prompt and changing
the source’s installed media). However, this setting gives a user the option of having the device resolve change
prompt situations without requiring any user assistance.
To change this setting:
1. From the Configuration Menu, navigate to
Action for prompts
.
2. Touch or to change the setting.
3. Touch
Submit
to save the setting, or touch
Back
to return to the Configuration Menu without saving any
changes.
When set to
Prompt user
, the device behaves like the past implementation. When a change prompt occurs, the
device stops printing, posts the change prompt to the target source, and waits for the user to select an action
before continuing.
When set to
Continue
, the device automatically assumes that the user selects
Continue
every time a change
prompt is encountered. Likewise, when the device is set to
Use Current
, all change prompts will perform as if
Use Current
was selected by the user.
Paper Prompts See
“Paper Prompts” on page 3-13
.
Envelope Prompts See
“Envelope Prompts” on page 3-9
.
Action for Prompts
See
“Action for prompts” on page 3-7
.
Jobs On Disk See
“Jobs on Disk” on page 3-11
.
Disk Encryption
See
“Disk Encryption” on page 3-9
.
Erase All Information on Disk See
“Erase all Information on Disk” on page 3-10
.
Wipe All Settings See
“Wipe All Settings” on page 3-16
.
Font Sharpening See
“Font Sharpening” on page 3-11
.
Require Standby
See
“Require Standby” on page 3-14
.
Short-edge Printing See
“Short-edge Printing” on page 3-14
.
UI Automation
See
“UI Automation” on page 3-15
.
Key Repeat Initial Delay See
“Key Repeat Initial Delay” on page 3-12
.
Key Repeat Rate See
“Key Repeat Rate” on page 3-12
.
Clear Custom Status See
“Clear Custom Status” on page 3-8
.
USB Speed
See
“USB Speed” on page 3-15
.
Automatically Display Error Screens See
“Automatically Display Error Screens” on page 3-8
.
Booklet Adjustments
See
“Booklet Adjustments” on page 3-8
.
Exit Config Menu